Pipes.BaseClasses.PartialTwoPortFlow ​
Base class for distributed fluid flow with finite-volume storage and staggered momentum balances.
Compared with Modelica.Fluid, this component inlines the declarations from PartialTwoPort because Dyad does not currently accept the required multiple inheritance together with PartialDistributedVolume. The duplicated declarations preserve the same public port interface and must remain consistent with FluidComponents.Interfaces.PartialTwoPort.
Workaround: Dyad does not currently parse indexed array comprehensions such as sum([crossAreas[i] for i in 1:iLumped - 1]), so the Modelica slice sums used by the lumped-pressure branches cannot be written directly. The cumulative arrays below are algebraically equivalent prefix sums used to express those same totals and weighted averages in valid Dyad syntax.
This component extends from FluidComponents.Interfaces.PartialDistributedVolume
Usage ​
FluidComponents.Pipes.BaseClasses.PartialTwoPortFlow(p_a_start, p_b_start=p_a_start, ps_start=n > 1 ? FluidComponents.collect(FluidComponents.range(p_a_start, p_b_start, length = n)) : FluidComponents.fill((p_a_start + p_b_start) / 2, n), T_start, h_start, X_start=FluidComponents.MediaComponents.Interfaces.medium_X_default(medium_data), C_start=FluidComponents.MediaComponents.Interfaces.medium_C_default(medium_data), showDesignFlowDirection=true, nParallel, lengths, crossAreas, dimensions, roughnesses, dheights, m_flow_start, dp_nominal, m_flow_nominal, g=9.80665)
Parameters: ​
| Name | Description | Units | Default value |
|---|---|---|---|
medium_data | – | ||
n | – | nNodes | |
ThermoStates | – | FluidCompon...edium_data) | |
singleState | – | FluidCompon...edium_data) | |
nX | – | FluidCompon...edium_data) | |
nXi | – | FluidCompon...edium_data) | |
nC | – | FluidCompon...edium_data) | |
energyDynamics | – | ||
massDynamics | – | ||
substanceDynamics | – | massDynamics | |
traceDynamics | – | massDynamics | |
use_T_start | – | ||
initialize_p | – | !singleState | |
allowFlowReversal | – | ||
port_a_exposesState | – | (__dyad_isa...ure.av_vb)) | |
port_b_exposesState | – | (__dyad_isa...ure.av_vb)) | |
nNodes | – | ||
modelStructure | – | ||
momentumDynamics | – | ||
useLumpedPressure | – | false | |
nFMDistributed | – | (__dyad_isa...: (n - 1))) | |
nFMLumped | – | (__dyad_isa...? (2) : (1) | |
nFM | – | (useLumpedP...istributed) | |
nFM_plus_1 | – | nFM + 1 | |
n_plus_1 | – | n + 1 | |
iLumped | – | div(n, 2) + 1 | |
useInnerPortProperties | – | false | |
reducedX | – | MediaCompon...edium_data) | |
fixedX | – | MediaCompon...edium_data) | |
p_a_start | Pa | ||
p_b_start | Pa | p_a_start | |
T_start | K | ||
h_start | J/kg | ||
X_start | kg/kg | FluidCompon...edium_data) | |
C_start | – | FluidCompon...edium_data) | |
showDesignFlowDirection | – | true | |
nParallel | – | ||
lengths | m | ||
crossAreas | m2 | ||
dimensions | m | ||
roughnesses | m | ||
dheights | m | ||
m_flow_start | kg/s | ||
dp_nominal | Pa | ||
m_flow_nominal | kg/s | ||
g | m/s2 | 9.80665 |
Connectors ​
port_a- Generic fluid connector at the design inlet. (FluidPort_a)port_b- Generic fluid connector at the design outlet. (FluidPort_b)
Variables ​
| Name | Description | Units |
|---|---|---|
fluidVolumes | m3 | |
Us | J | |
ms | kg | |
mXis | kg | |
mCs | kg | |
mCs_scaled | kg | |
Cs | – | |
mb_flows | kg/s | |
mbXi_flows | kg/s | |
mbC_flows | kg/s | |
Hb_flows | W | |
Qb_flows | W | |
Wb_flows | W | |
m_flows | kg/s | |
mXi_flows | kg/s | |
mC_flows | kg/s | |
H_flows | W | |
vs | m/s | |
pathLengths | m | |
dheightsFM | m | |
crossAreasFM | m2 | |
vsFM | m/s | |
dimensionsFM | m | |
roughnessesFM | m | |
cumulativeLengths | m | |
cumulativeDheights | m | |
cumulativeCrossAreas | m2 | |
cumulativeDimensions | m | |
cumulativeRoughnesses | m | |
cumulativeVelocityLengths | m2/s |
Source ​
"""
Base class for distributed fluid flow with finite-volume storage and staggered momentum balances.
Compared with Modelica.Fluid, this component inlines the declarations from
PartialTwoPort because Dyad does not currently accept the required multiple
inheritance together with PartialDistributedVolume. The duplicated declarations
preserve the same public port interface and must remain consistent with
FluidComponents.Interfaces.PartialTwoPort.
Workaround: Dyad does not currently parse indexed array comprehensions such as
`sum([crossAreas[i] for i in 1:iLumped - 1])`, so the Modelica slice sums used
by the lumped-pressure branches cannot be written directly. The cumulative
arrays below are algebraically equivalent prefix sums used to express those
same totals and weighted averages in valid Dyad syntax.
"""
partial component PartialTwoPortFlow
extends FluidComponents.Interfaces.PartialDistributedVolume(n = nNodes)
# Whether flow may reverse from the positive design direction [-]
structural parameter allowFlowReversal::Boolean
# Fluid connector at the design inlet [-]
port_a = FluidComponents.Interfaces.FluidPort_a(medium_data = medium_data) {
"Dyad": {
"placement": {
"icon": {"iconName": "default", "x1": -50, "y1": 450, "x2": 50, "y2": 550, "rot": 0}
}
}
}
# Fluid connector at the design outlet [-]
port_b = FluidComponents.Interfaces.FluidPort_b(medium_data = medium_data) {
"Dyad": {
"placement": {
"icon": {"iconName": "default", "x1": 950, "y1": 450, "x2": 1050, "y2": 550, "rot": 0}
}
}
}
# Whether port_a exposes the state of an internal fluid volume [-]
final structural parameter port_a_exposesState::Boolean = case(modelStructure, FluidComponents.Types.ModelStructure.av_b) or case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
# Whether port_b exposes the state of an internal fluid volume [-]
final structural parameter port_b_exposesState::Boolean = case(modelStructure, FluidComponents.Types.ModelStructure.a_vb) or case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
# Whether to show the positive design-flow direction [-]
parameter showDesignFlowDirection::Boolean = true
# Number of discrete fluid volumes [-]
structural parameter nNodes::Integer(min = 1)
# Placement of momentum balances relative to the fluid volumes [-]
structural parameter modelStructure::FluidComponents.Types.ModelStructure
# Number of identical parallel flow devices [-]
parameter nParallel::Real(min = 1)
# Lengths of the fluid-volume segments [m]
parameter lengths::Length[n]
# Cross-sectional flow areas of the fluid-volume segments [m2]
parameter crossAreas::Area[n]
# Hydraulic diameters of the fluid-volume segments [m]
parameter dimensions::Length[n]
# Average surface roughnesses of the fluid-volume segments [m]
parameter roughnesses::FluidComponents.Types.Roughness[n]
# Height differences across the fluid-volume segments [m]
parameter dheights::Length[n]
# Formulation of the momentum balances [-]
structural parameter momentumDynamics::FluidComponents.Types.Dynamics
# Start value of the mass flow rate [kg/s]
parameter m_flow_start::MediaComponents.Types.MassFlowRate
# Whether all internal pressure states are lumped together [-]
structural parameter useLumpedPressure::Boolean = false
# Number of distributed momentum balances [-]
final structural parameter nFMDistributed::Integer = case(modelStructure, FluidComponents.Types.ModelStructure.a_v_b) ? n + 1 : ((case(modelStructure, FluidComponents.Types.ModelStructure.a_vb) or case(modelStructure, FluidComponents.Types.ModelStructure.av_b)) ? n : n - 1)
# Number of lumped momentum balances [-]
final structural parameter nFMLumped::Integer = case(modelStructure, FluidComponents.Types.ModelStructure.a_v_b) ? 2 : 1
# Number of momentum balances used by the flow model [-]
final structural parameter nFM::Integer = useLumpedPressure ? nFMLumped : nFMDistributed
# Number of thermodynamic states used by the flow model [-]
final structural parameter nFM_plus_1::Integer = nFM + 1
# Number of fluid-volume boundaries [-]
final structural parameter n_plus_1::Integer = n + 1
# Index of the representative volume for lumped pressure [-]
final structural parameter iLumped::Integer = div(n, 2) + 1
# Whether flow-model port states use adjacent internal-volume properties [-]
structural parameter useInnerPortProperties::Boolean = false
# Whether the medium mass fractions sum to one [-]
final structural parameter reducedX::Boolean = MediaComponents.Interfaces.medium_reducedX(medium_data)
# Whether the medium composition is fixed [-]
final structural parameter fixedX::Boolean = MediaComponents.Interfaces.medium_fixedX(medium_data)
# Nominal pressure loss used by the laminar flow model [Pa]
parameter dp_nominal::MediaComponents.Types.AbsolutePressure
# Mass flow rate at the nominal pressure loss [kg/s]
parameter m_flow_nominal::MediaComponents.Types.MassFlowRate
# Constant gravitational acceleration [m/s2]
parameter g::Acceleration = 9.80665
"Thermodynamic state immediately outside port_a."
state_a = MediaComponents.Interfaces.ThermodynamicState(medium_data = medium_data)
"Thermodynamic state immediately outside port_b."
state_b = MediaComponents.Interfaces.ThermodynamicState(medium_data = medium_data)
"Thermodynamic states supplied to the staggered flow model."
statesFM = [MediaComponents.Interfaces.ThermodynamicState(medium_data = medium_data) for i in 1:nFM_plus_1]
"Linear laminar wall-friction, gravity, and momentum model."
flowModel = FluidComponents.Pipes.BaseClasses.FlowModels.NominalLaminarFlow(medium_data = medium_data, n = nFM_plus_1, momentumDynamics = momentumDynamics, allowFlowReversal = allowFlowReversal, p_a_start = p_a_start, p_b_start = p_b_start, m_flow_start = m_flow_start, nParallel = nParallel, g = g, dp_nominal = dp_nominal, m_flow_nominal = m_flow_nominal)
# Mass flow rates across the fluid-volume boundaries [kg/s]
variable m_flows::MediaComponents.Types.MassFlowRate(min = allowFlowReversal ? -Inf : 0)[n_plus_1]
# Independent-substance mass flow rates across the boundaries [kg/s]
variable mXi_flows::MediaComponents.Types.MassFlowRate[n_plus_1, nXi] if nXi > 0
# Trace-substance flow rates across the boundaries [kg/s]
variable mC_flows::MediaComponents.Types.MassFlowRate[n_plus_1, nC] if nC > 0
# Enthalpy flow rates across the fluid-volume boundaries [W]
variable H_flows::EnthalpyFlowRate[n_plus_1]
# Mean velocities in the fluid-volume segments [m/s]
variable vs::Velocity[n]
# Lengths of the flow-model momentum segments [m]
variable pathLengths::Length[nFM]
# Height differences across the flow-model momentum segments [m]
variable dheightsFM::Length[nFM]
# Cross-sectional areas at the flow-model state locations [m2]
variable crossAreasFM::Area[nFM_plus_1]
# Mean velocities at the flow-model state locations [m/s]
variable vsFM::Velocity[nFM_plus_1]
# Hydraulic diameters at the flow-model state locations [m]
variable dimensionsFM::Length[nFM_plus_1]
# Surface roughnesses at the flow-model state locations [m]
variable roughnessesFM::FluidComponents.Types.Roughness[nFM_plus_1]
# Cumulative segment lengths used to scalarize Modelica slice sums [m]
variable cumulativeLengths::Length[n_plus_1]
# Cumulative height differences used to scalarize Modelica slice sums [m]
variable cumulativeDheights::Length[n_plus_1]
# Cumulative cross-sectional areas used to scalarize Modelica slice sums [m2]
variable cumulativeCrossAreas::Area[n_plus_1]
# Cumulative hydraulic diameters used to scalarize Modelica slice sums [m]
variable cumulativeDimensions::Length[n_plus_1]
# Cumulative surface roughnesses used to scalarize Modelica slice sums [m]
variable cumulativeRoughnesses::Length[n_plus_1]
# Cumulative velocity-length products used for lumped mean velocities [m2/s]
variable cumulativeVelocityLengths::Real(units = "m2/s")[n_plus_1]
relations
for i in 1:nFM_plus_1
flowModel.states[i].p = statesFM[i].p
flowModel.states[i].T = statesFM[i].T
flowModel.states[i].d = statesFM[i].d
flowModel.states[i].h = statesFM[i].h
for j in 1:nX
flowModel.states[i].X[j] = statesFM[i].X[j]
end
flowModel.vs[i] = vsFM[i]
flowModel.crossAreas[i] = crossAreasFM[i]
flowModel.dimensions[i] = dimensionsFM[i]
flowModel.roughnesses[i] = roughnessesFM[i]
end
for i in 1:nFM
flowModel.pathLengths[i] = pathLengths[i]
flowModel.dheights[i] = dheightsFM[i]
end
cumulativeLengths[1] = 0
cumulativeDheights[1] = 0
cumulativeCrossAreas[1] = 0
cumulativeDimensions[1] = 0
cumulativeRoughnesses[1] = 0
cumulativeVelocityLengths[1] = 0
for i in 1:n
cumulativeLengths[i + 1] = cumulativeLengths[i] + lengths[i]
cumulativeDheights[i + 1] = cumulativeDheights[i] + dheights[i]
cumulativeCrossAreas[i + 1] = cumulativeCrossAreas[i] + crossAreas[i]
cumulativeDimensions[i + 1] = cumulativeDimensions[i] + dimensions[i]
cumulativeRoughnesses[i + 1] = cumulativeRoughnesses[i] + roughnesses[i]
cumulativeVelocityLengths[i + 1] = cumulativeVelocityLengths[i] + vs[i] * lengths[i]
end
if useLumpedPressure
if !case(modelStructure, FluidComponents.Types.ModelStructure.a_v_b)
pathLengths[1] = cumulativeLengths[n_plus_1]
dheightsFM[1] = cumulativeDheights[n_plus_1]
if n == 1
crossAreasFM[1] = crossAreas[1]
crossAreasFM[2] = crossAreas[1]
dimensionsFM[1] = dimensions[1]
dimensionsFM[2] = dimensions[1]
roughnessesFM[1] = roughnesses[1]
roughnessesFM[2] = roughnesses[1]
else
crossAreasFM[1] = cumulativeCrossAreas[iLumped] / (iLumped - 1)
crossAreasFM[2] = (cumulativeCrossAreas[n_plus_1] - cumulativeCrossAreas[iLumped]) / (n - iLumped + 1)
dimensionsFM[1] = cumulativeDimensions[iLumped] / (iLumped - 1)
dimensionsFM[2] = (cumulativeDimensions[n_plus_1] - cumulativeDimensions[iLumped]) / (n - iLumped + 1)
roughnessesFM[1] = cumulativeRoughnesses[iLumped] / (iLumped - 1)
roughnessesFM[2] = (cumulativeRoughnesses[n_plus_1] - cumulativeRoughnesses[iLumped]) / (n - iLumped + 1)
end
else
if n == 1
pathLengths[1] = lengths[1] / 2
pathLengths[2] = lengths[1] / 2
dheightsFM[1] = dheights[1] / 2
dheightsFM[2] = dheights[1] / 2
for i in 1:3
crossAreasFM[i] = crossAreas[1]
dimensionsFM[i] = dimensions[1]
roughnessesFM[i] = roughnesses[1]
end
else
pathLengths[1] = cumulativeLengths[iLumped]
pathLengths[2] = cumulativeLengths[n_plus_1] - cumulativeLengths[iLumped]
dheightsFM[1] = cumulativeDheights[iLumped]
dheightsFM[2] = cumulativeDheights[n_plus_1] - cumulativeDheights[iLumped]
crossAreasFM[1] = cumulativeCrossAreas[iLumped] / (iLumped - 1)
crossAreasFM[2] = cumulativeCrossAreas[n_plus_1] / n
crossAreasFM[3] = (cumulativeCrossAreas[n_plus_1] - cumulativeCrossAreas[iLumped]) / (n - iLumped + 1)
dimensionsFM[1] = cumulativeDimensions[iLumped] / (iLumped - 1)
dimensionsFM[2] = cumulativeDimensions[n_plus_1] / n
dimensionsFM[3] = (cumulativeDimensions[n_plus_1] - cumulativeDimensions[iLumped]) / (n - iLumped + 1)
roughnessesFM[1] = cumulativeRoughnesses[iLumped] / (iLumped - 1)
roughnessesFM[2] = cumulativeRoughnesses[n_plus_1] / n
roughnessesFM[3] = (cumulativeRoughnesses[n_plus_1] - cumulativeRoughnesses[iLumped]) / (n - iLumped + 1)
end
end
else
if case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
if n == 2
pathLengths[1] = lengths[1] + lengths[2]
dheightsFM[1] = dheights[1] + dheights[2]
else
pathLengths[1] = lengths[1] + 0.5 * lengths[2]
dheightsFM[1] = dheights[1] + 0.5 * dheights[2]
for i in 2:n - 2
pathLengths[i] = 0.5 * (lengths[i] + lengths[i + 1])
dheightsFM[i] = 0.5 * (dheights[i] + dheights[i + 1])
end
pathLengths[n - 1] = 0.5 * lengths[n - 1] + lengths[n]
dheightsFM[n - 1] = 0.5 * dheights[n - 1] + dheights[n]
end
for i in 1:n
crossAreasFM[i] = crossAreas[i]
dimensionsFM[i] = dimensions[i]
roughnessesFM[i] = roughnesses[i]
end
elseif case(modelStructure, FluidComponents.Types.ModelStructure.av_b)
for i in 1:n
pathLengths[i] = lengths[i]
dheightsFM[i] = dheights[i]
crossAreasFM[i] = crossAreas[i]
dimensionsFM[i] = dimensions[i]
roughnessesFM[i] = roughnesses[i]
end
crossAreasFM[n_plus_1] = crossAreas[n]
dimensionsFM[n_plus_1] = dimensions[n]
roughnessesFM[n_plus_1] = roughnesses[n]
elseif case(modelStructure, FluidComponents.Types.ModelStructure.a_vb)
crossAreasFM[1] = crossAreas[1]
dimensionsFM[1] = dimensions[1]
roughnessesFM[1] = roughnesses[1]
for i in 1:n
pathLengths[i] = lengths[i]
dheightsFM[i] = dheights[i]
crossAreasFM[i + 1] = crossAreas[i]
dimensionsFM[i + 1] = dimensions[i]
roughnessesFM[i + 1] = roughnesses[i]
end
else
pathLengths[1] = 0.5 * lengths[1]
dheightsFM[1] = 0.5 * dheights[1]
crossAreasFM[1] = crossAreas[1]
dimensionsFM[1] = dimensions[1]
roughnessesFM[1] = roughnesses[1]
for i in 2:n
pathLengths[i] = 0.5 * (lengths[i - 1] + lengths[i])
dheightsFM[i] = 0.5 * (dheights[i - 1] + dheights[i])
crossAreasFM[i] = crossAreas[i - 1]
dimensionsFM[i] = dimensions[i - 1]
roughnessesFM[i] = roughnesses[i - 1]
end
pathLengths[n_plus_1] = 0.5 * lengths[n]
dheightsFM[n_plus_1] = 0.5 * dheights[n]
crossAreasFM[n_plus_1] = crossAreas[n]
dimensionsFM[n_plus_1] = dimensions[n]
roughnessesFM[n_plus_1] = roughnesses[n]
crossAreasFM[n_plus_1 + 1] = crossAreas[n]
dimensionsFM[n_plus_1 + 1] = dimensions[n]
roughnessesFM[n_plus_1 + 1] = roughnesses[n]
end
end
guess m_flows = fill(m_flow_start, n_plus_1)
state_a.p = port_a.p
state_b.p = port_b.p
if useInnerPortProperties
state_a.h = mediums[1].h
state_b.h = mediums[n].h
for j in 1:nX
state_a.X[j] = mediums[1].X[j]
state_b.X[j] = mediums[n].X[j]
end
else
state_a.h = instream(port_a.h_outflow)
state_b.h = instream(port_b.h_outflow)
if fixedX
for j in 1:nX
state_a.X[j] = mediums[1].X[j]
state_b.X[j] = mediums[n].X[j]
end
elseif reducedX
if nXi > 0
for j in 1:nXi
state_a.X[j] = instream(port_a.Xi_outflow[j])
state_b.X[j] = instream(port_b.Xi_outflow[j])
end
state_a.X[nX] = 1 - sum(instream(port_a.Xi_outflow))
state_b.X[nX] = 1 - sum(instream(port_b.Xi_outflow))
else
state_a.X[nX] = 1
state_b.X[nX] = 1
end
else
for j in 1:nX
state_a.X[j] = instream(port_a.Xi_outflow[j])
state_b.X[j] = instream(port_b.Xi_outflow[j])
end
end
end
state_a.T = MediaComponents.Interfaces.temperature_phX(medium_data, state_a.p, state_a.h, state_a.X)
state_a.d = MediaComponents.Interfaces.density_phX(medium_data, state_a.p, state_a.h, state_a.X)
state_b.T = MediaComponents.Interfaces.temperature_phX(medium_data, state_b.p, state_b.h, state_b.X)
state_b.d = MediaComponents.Interfaces.density_phX(medium_data, state_b.p, state_b.h, state_b.X)
for i in 1:n
fluidVolumes[i] = crossAreas[i] * lengths[i] * nParallel
vs[i] = 0.5 * (m_flows[i] + m_flows[i + 1]) / mediums[i].d / crossAreas[i] / nParallel
mb_flows[i] = m_flows[i] - m_flows[i + 1]
Hb_flows[i] = H_flows[i] - H_flows[i + 1]
if nXi > 0
for j in 1:nXi
mbXi_flows[i, j] = mXi_flows[i, j] - mXi_flows[i + 1, j]
end
end
if nC > 0
for j in 1:nC
mbC_flows[i, j] = mC_flows[i, j] - mC_flows[i + 1, j]
end
end
end
for i in 2:n
H_flows[i] = FluidComponents.semilinear(m_flows[i], mediums[i - 1].h, mediums[i].h)
if nXi > 0
for j in 1:nXi
mXi_flows[i, j] = FluidComponents.semilinear(m_flows[i], mediums[i - 1].Xi[j], mediums[i].Xi[j])
end
end
if nC > 0
for j in 1:nC
mC_flows[i, j] = FluidComponents.semilinear(m_flows[i], Cs[i - 1, j], Cs[i, j])
end
end
end
H_flows[1] = FluidComponents.semilinear(port_a.m_flow, instream(port_a.h_outflow), mediums[1].h)
H_flows[n_plus_1] = -FluidComponents.semilinear(port_b.m_flow, instream(port_b.h_outflow), mediums[n].h)
if nXi > 0
for j in 1:nXi
mXi_flows[1, j] = FluidComponents.semilinear(port_a.m_flow, instream(port_a.Xi_outflow[j]), mediums[1].Xi[j])
mXi_flows[n_plus_1, j] = -FluidComponents.semilinear(port_b.m_flow, instream(port_b.Xi_outflow[j]), mediums[n].Xi[j])
end
end
if nC > 0
for j in 1:nC
mC_flows[1, j] = FluidComponents.semilinear(port_a.m_flow, instream(port_a.C_outflow[j]), Cs[1, j])
mC_flows[n_plus_1, j] = -FluidComponents.semilinear(port_b.m_flow, instream(port_b.C_outflow[j]), Cs[n, j])
end
end
port_a.m_flow = m_flows[1]
port_b.m_flow = -m_flows[n_plus_1]
port_a.h_outflow = mediums[1].h
port_b.h_outflow = mediums[n].h
if nXi > 0
for j in 1:nXi
port_a.Xi_outflow[j] = mediums[1].Xi[j]
port_b.Xi_outflow[j] = mediums[n].Xi[j]
end
else
port_a.Xi_outflow[1] = 0
port_b.Xi_outflow[1] = 0
end
# Trace properties are stored in the volumes and therefore use the same
# adjacent-volume outflow convention as the independent mass fractions.
if nC > 0
for j in 1:nC
port_a.C_outflow[j] = Cs[1, j]
port_b.C_outflow[j] = Cs[n, j]
end
else
port_a.C_outflow[1] = 0
port_b.C_outflow[1] = 0
end
if useLumpedPressure
if !case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
for i in 2:n
mediums[i].p = mediums[1].p
end
elseif n > 2
for i in 2:iLumped - 1
mediums[i].p = mediums[1].p
end
for i in iLumped:n - 1
mediums[i].p = mediums[n].p
end
end
if case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
port_a.p = mediums[1].p
port_b.p = mediums[n].p
statesFM[1].p = mediums[1].p
statesFM[1].T = mediums[1].T
statesFM[1].d = mediums[1].d
statesFM[1].h = mediums[1].h
statesFM[2].p = mediums[n].p
statesFM[2].T = mediums[n].T
statesFM[2].d = mediums[n].d
statesFM[2].h = mediums[n].h
for j in 1:nX
statesFM[1].X[j] = mediums[1].X[j]
statesFM[2].X[j] = mediums[n].X[j]
end
m_flows[iLumped] = flowModel.m_flows[1]
vsFM[1] = cumulativeVelocityLengths[iLumped] / cumulativeLengths[iLumped]
vsFM[2] = (cumulativeVelocityLengths[n_plus_1] - cumulativeVelocityLengths[iLumped]) / (cumulativeLengths[n_plus_1] - cumulativeLengths[iLumped])
elseif case(modelStructure, FluidComponents.Types.ModelStructure.av_b)
port_a.p = mediums[1].p
statesFM[1].p = mediums[iLumped].p
statesFM[1].T = mediums[iLumped].T
statesFM[1].d = mediums[iLumped].d
statesFM[1].h = mediums[iLumped].h
statesFM[2].p = state_b.p
statesFM[2].T = state_b.T
statesFM[2].d = state_b.d
statesFM[2].h = state_b.h
for j in 1:nX
statesFM[1].X[j] = mediums[iLumped].X[j]
statesFM[2].X[j] = state_b.X[j]
end
m_flows[n_plus_1] = flowModel.m_flows[1]
vsFM[1] = cumulativeVelocityLengths[n_plus_1] / cumulativeLengths[n_plus_1]
vsFM[2] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
elseif case(modelStructure, FluidComponents.Types.ModelStructure.a_vb)
port_b.p = mediums[n].p
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
statesFM[2].p = mediums[iLumped].p
statesFM[2].T = mediums[iLumped].T
statesFM[2].d = mediums[iLumped].d
statesFM[2].h = mediums[iLumped].h
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
statesFM[2].X[j] = mediums[iLumped].X[j]
end
m_flows[1] = flowModel.m_flows[1]
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
vsFM[2] = cumulativeVelocityLengths[n_plus_1] / cumulativeLengths[n_plus_1]
else
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
statesFM[2].p = mediums[iLumped].p
statesFM[2].T = mediums[iLumped].T
statesFM[2].d = mediums[iLumped].d
statesFM[2].h = mediums[iLumped].h
statesFM[3].p = state_b.p
statesFM[3].T = state_b.T
statesFM[3].d = state_b.d
statesFM[3].h = state_b.h
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
statesFM[2].X[j] = mediums[iLumped].X[j]
statesFM[3].X[j] = state_b.X[j]
end
m_flows[1] = flowModel.m_flows[1]
m_flows[n_plus_1] = flowModel.m_flows[2]
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
vsFM[2] = cumulativeVelocityLengths[n_plus_1] / cumulativeLengths[n_plus_1]
vsFM[3] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
end
else
if case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
for i in 1:n
statesFM[i].p = mediums[i].p
statesFM[i].T = mediums[i].T
statesFM[i].d = mediums[i].d
statesFM[i].h = mediums[i].h
vsFM[i] = vs[i]
for j in 1:nX
statesFM[i].X[j] = mediums[i].X[j]
end
end
for i in 1:n - 1
m_flows[i + 1] = flowModel.m_flows[i]
end
port_a.p = mediums[1].p
port_b.p = mediums[n].p
elseif case(modelStructure, FluidComponents.Types.ModelStructure.av_b)
for i in 1:n
statesFM[i].p = mediums[i].p
statesFM[i].T = mediums[i].T
statesFM[i].d = mediums[i].d
statesFM[i].h = mediums[i].h
vsFM[i] = vs[i]
for j in 1:nX
statesFM[i].X[j] = mediums[i].X[j]
end
end
statesFM[n_plus_1].p = state_b.p
statesFM[n_plus_1].T = state_b.T
statesFM[n_plus_1].d = state_b.d
statesFM[n_plus_1].h = state_b.h
for j in 1:nX
statesFM[n_plus_1].X[j] = state_b.X[j]
end
for i in 1:n
m_flows[i + 1] = flowModel.m_flows[i]
end
vsFM[n_plus_1] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
port_a.p = mediums[1].p
elseif case(modelStructure, FluidComponents.Types.ModelStructure.a_vb)
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
end
for i in 1:n
statesFM[i + 1].p = mediums[i].p
statesFM[i + 1].T = mediums[i].T
statesFM[i + 1].d = mediums[i].d
statesFM[i + 1].h = mediums[i].h
m_flows[i] = flowModel.m_flows[i]
vsFM[i + 1] = vs[i]
for j in 1:nX
statesFM[i + 1].X[j] = mediums[i].X[j]
end
end
port_b.p = mediums[n].p
else
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
end
for i in 1:n
statesFM[i + 1].p = mediums[i].p
statesFM[i + 1].T = mediums[i].T
statesFM[i + 1].d = mediums[i].d
statesFM[i + 1].h = mediums[i].h
m_flows[i] = flowModel.m_flows[i]
vsFM[i + 1] = vs[i]
for j in 1:nX
statesFM[i + 1].X[j] = mediums[i].X[j]
end
end
m_flows[n_plus_1] = flowModel.m_flows[n_plus_1]
statesFM[n_plus_1 + 1].p = state_b.p
statesFM[n_plus_1 + 1].T = state_b.T
statesFM[n_plus_1 + 1].d = state_b.d
statesFM[n_plus_1 + 1].h = state_b.h
vsFM[n_plus_1 + 1] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
for j in 1:nX
statesFM[n_plus_1 + 1].X[j] = state_b.X[j]
end
end
end
endFlattened Source
"""
Base class for distributed fluid flow with finite-volume storage and staggered momentum balances.
Compared with Modelica.Fluid, this component inlines the declarations from
PartialTwoPort because Dyad does not currently accept the required multiple
inheritance together with PartialDistributedVolume. The duplicated declarations
preserve the same public port interface and must remain consistent with
FluidComponents.Interfaces.PartialTwoPort.
Workaround: Dyad does not currently parse indexed array comprehensions such as
`sum([crossAreas[i] for i in 1:iLumped - 1])`, so the Modelica slice sums used
by the lumped-pressure branches cannot be written directly. The cumulative
arrays below are algebraically equivalent prefix sums used to express those
same totals and weighted averages in valid Dyad syntax.
"""
partial component PartialTwoPortFlow
# Immutable medium definition selected at model construction [-]
structural parameter medium_data::MediaComponents.Interfaces.AbstractPartialMediumData
# Number of discrete fluid volumes [-]
structural parameter n::Integer(min = 1)
# Choice of independent thermodynamic variables [-]
final structural parameter ThermoStates::MediaComponents.Interfaces.Choices.IndependentVariables = MediaComponents.Interfaces.medium_thermo_states(medium_data)
# Whether internal energy and density are independent of pressure [-]
final structural parameter singleState::Boolean = MediaComponents.Interfaces.medium_single_state(medium_data)
# Number of mass fractions [-]
final structural parameter nX::Integer = MediaComponents.Interfaces.medium_nX(medium_data)
# Number of independent mass fractions [-]
final structural parameter nXi::Integer = MediaComponents.Interfaces.medium_nXi(medium_data)
# Number of extra transported properties [-]
final structural parameter nC::Integer = MediaComponents.Interfaces.medium_nC(medium_data)
# Formulation of the energy balances [-]
structural parameter energyDynamics::FluidComponents.Types.Dynamics
# Formulation of the mass balances [-]
structural parameter massDynamics::FluidComponents.Types.Dynamics
# Formulation of the substance balances [-]
final structural parameter substanceDynamics::FluidComponents.Types.Dynamics = massDynamics
# Formulation of the trace-substance balances [-]
final structural parameter traceDynamics::FluidComponents.Types.Dynamics = massDynamics
# Start value of pressure at port a [Pa]
parameter p_a_start::MediaComponents.Types.AbsolutePressure
# Start value of pressure at port b [Pa]
parameter p_b_start::MediaComponents.Types.AbsolutePressure = p_a_start
# Start values of pressure across the fluid volumes [Pa]
final parameter ps_start::MediaComponents.Types.AbsolutePressure[n] = n > 1 ? collect(range(p_a_start, p_b_start, length = n)) : fill((p_a_start + p_b_start) / 2, n)
# Whether temperature rather than specific enthalpy supplied the start state [-]
structural parameter use_T_start::Boolean
# Start value of temperature [K]
parameter T_start::MediaComponents.Types.Temperature
# Start value of specific enthalpy [J/kg]
parameter h_start::MediaComponents.Types.SpecificEnthalpy
# Start values of mass fractions [kg/kg]
parameter X_start::MediaComponents.Types.MassFraction[nX] = MediaComponents.Interfaces.medium_X_default(medium_data)
# Start values of trace substances [-]
parameter C_start::MediaComponents.Types.ExtraProperty[nC] = MediaComponents.Interfaces.medium_C_default(medium_data) if nC > 0
# Discretized fluid volumes supplied by the extending component [m3]
variable fluidVolumes::Volume[n]
# Internal energy stored in each fluid volume [J]
variable Us::Energy[n]
# Fluid mass stored in each fluid volume [kg]
variable ms::Mass[n]
# Independent-substance mass stored in each fluid volume [kg]
variable mXis::Mass[n, nXi] if nXi > 0
# Trace-substance mass stored in each fluid volume [kg]
variable mCs::Mass[n, nC] if nC > 0
# Scaled trace-substance mass state [kg]
variable mCs_scaled::Mass[n, nC] if nC > 0
# Trace-substance mixture content [-]
variable Cs::MediaComponents.Types.ExtraProperty[n, nC] if nC > 0
"Thermodynamic properties for each fluid volume."
mediums = [MediaComponents.Interfaces.BaseProperties(medium_data = medium_data, preferredMediumStates = true) for i in 1:n]
# Mass source flow for each fluid volume [kg/s]
variable mb_flows::MediaComponents.Types.MassFlowRate[n]
# Independent-substance source flow for each fluid volume [kg/s]
variable mbXi_flows::MediaComponents.Types.MassFlowRate[n, nXi] if nXi > 0
# Trace-substance source flow for each fluid volume [kg/s]
variable mbC_flows::MediaComponents.Types.ExtraPropertyFlowRate[n, nC] if nC > 0
# Enthalpy source flow for each fluid volume [W]
variable Hb_flows::EnthalpyFlowRate[n]
# Heat source flow for each fluid volume [W]
variable Qb_flows::HeatFlowRate[n]
# Mechanical power supplied to each fluid volume [W]
variable Wb_flows::Power[n]
# Whether pressure requires an explicit initialization equation [-]
final structural parameter initialize_p::Boolean = !singleState
# Whether flow may reverse from the positive design direction [-]
structural parameter allowFlowReversal::Boolean
# Fluid connector at the design inlet [-]
port_a = FluidComponents.Interfaces.FluidPort_a(medium_data = medium_data) {
"Dyad": {
"placement": {
"icon": {"iconName": "default", "x1": -50, "y1": 450, "x2": 50, "y2": 550, "rot": 0}
}
}
}
# Fluid connector at the design outlet [-]
port_b = FluidComponents.Interfaces.FluidPort_b(medium_data = medium_data) {
"Dyad": {
"placement": {
"icon": {"iconName": "default", "x1": 950, "y1": 450, "x2": 1050, "y2": 550, "rot": 0}
}
}
}
# Whether port_a exposes the state of an internal fluid volume [-]
final structural parameter port_a_exposesState::Boolean = case(modelStructure, FluidComponents.Types.ModelStructure.av_b) or case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
# Whether port_b exposes the state of an internal fluid volume [-]
final structural parameter port_b_exposesState::Boolean = case(modelStructure, FluidComponents.Types.ModelStructure.a_vb) or case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
# Whether to show the positive design-flow direction [-]
parameter showDesignFlowDirection::Boolean = true
# Number of discrete fluid volumes [-]
structural parameter nNodes::Integer(min = 1)
# Placement of momentum balances relative to the fluid volumes [-]
structural parameter modelStructure::FluidComponents.Types.ModelStructure
# Number of identical parallel flow devices [-]
parameter nParallel::Real(min = 1)
# Lengths of the fluid-volume segments [m]
parameter lengths::Length[n]
# Cross-sectional flow areas of the fluid-volume segments [m2]
parameter crossAreas::Area[n]
# Hydraulic diameters of the fluid-volume segments [m]
parameter dimensions::Length[n]
# Average surface roughnesses of the fluid-volume segments [m]
parameter roughnesses::FluidComponents.Types.Roughness[n]
# Height differences across the fluid-volume segments [m]
parameter dheights::Length[n]
# Formulation of the momentum balances [-]
structural parameter momentumDynamics::FluidComponents.Types.Dynamics
# Start value of the mass flow rate [kg/s]
parameter m_flow_start::MediaComponents.Types.MassFlowRate
# Whether all internal pressure states are lumped together [-]
structural parameter useLumpedPressure::Boolean = false
# Number of distributed momentum balances [-]
final structural parameter nFMDistributed::Integer = case(modelStructure, FluidComponents.Types.ModelStructure.a_v_b) ? n + 1 : ((case(modelStructure, FluidComponents.Types.ModelStructure.a_vb) or case(modelStructure, FluidComponents.Types.ModelStructure.av_b)) ? n : n - 1)
# Number of lumped momentum balances [-]
final structural parameter nFMLumped::Integer = case(modelStructure, FluidComponents.Types.ModelStructure.a_v_b) ? 2 : 1
# Number of momentum balances used by the flow model [-]
final structural parameter nFM::Integer = useLumpedPressure ? nFMLumped : nFMDistributed
# Number of thermodynamic states used by the flow model [-]
final structural parameter nFM_plus_1::Integer = nFM + 1
# Number of fluid-volume boundaries [-]
final structural parameter n_plus_1::Integer = n + 1
# Index of the representative volume for lumped pressure [-]
final structural parameter iLumped::Integer = div(n, 2) + 1
# Whether flow-model port states use adjacent internal-volume properties [-]
structural parameter useInnerPortProperties::Boolean = false
# Whether the medium mass fractions sum to one [-]
final structural parameter reducedX::Boolean = MediaComponents.Interfaces.medium_reducedX(medium_data)
# Whether the medium composition is fixed [-]
final structural parameter fixedX::Boolean = MediaComponents.Interfaces.medium_fixedX(medium_data)
# Nominal pressure loss used by the laminar flow model [Pa]
parameter dp_nominal::MediaComponents.Types.AbsolutePressure
# Mass flow rate at the nominal pressure loss [kg/s]
parameter m_flow_nominal::MediaComponents.Types.MassFlowRate
# Constant gravitational acceleration [m/s2]
parameter g::Acceleration = 9.80665
"Thermodynamic state immediately outside port_a."
state_a = MediaComponents.Interfaces.ThermodynamicState(medium_data = medium_data)
"Thermodynamic state immediately outside port_b."
state_b = MediaComponents.Interfaces.ThermodynamicState(medium_data = medium_data)
"Thermodynamic states supplied to the staggered flow model."
statesFM = [MediaComponents.Interfaces.ThermodynamicState(medium_data = medium_data) for i in 1:nFM_plus_1]
"Linear laminar wall-friction, gravity, and momentum model."
flowModel = FluidComponents.Pipes.BaseClasses.FlowModels.NominalLaminarFlow(medium_data = medium_data, n = nFM_plus_1, momentumDynamics = momentumDynamics, allowFlowReversal = allowFlowReversal, p_a_start = p_a_start, p_b_start = p_b_start, m_flow_start = m_flow_start, nParallel = nParallel, g = g, dp_nominal = dp_nominal, m_flow_nominal = m_flow_nominal)
# Mass flow rates across the fluid-volume boundaries [kg/s]
variable m_flows::MediaComponents.Types.MassFlowRate(min = allowFlowReversal ? -Inf : 0)[n_plus_1]
# Independent-substance mass flow rates across the boundaries [kg/s]
variable mXi_flows::MediaComponents.Types.MassFlowRate[n_plus_1, nXi] if nXi > 0
# Trace-substance flow rates across the boundaries [kg/s]
variable mC_flows::MediaComponents.Types.MassFlowRate[n_plus_1, nC] if nC > 0
# Enthalpy flow rates across the fluid-volume boundaries [W]
variable H_flows::EnthalpyFlowRate[n_plus_1]
# Mean velocities in the fluid-volume segments [m/s]
variable vs::Velocity[n]
# Lengths of the flow-model momentum segments [m]
variable pathLengths::Length[nFM]
# Height differences across the flow-model momentum segments [m]
variable dheightsFM::Length[nFM]
# Cross-sectional areas at the flow-model state locations [m2]
variable crossAreasFM::Area[nFM_plus_1]
# Mean velocities at the flow-model state locations [m/s]
variable vsFM::Velocity[nFM_plus_1]
# Hydraulic diameters at the flow-model state locations [m]
variable dimensionsFM::Length[nFM_plus_1]
# Surface roughnesses at the flow-model state locations [m]
variable roughnessesFM::FluidComponents.Types.Roughness[nFM_plus_1]
# Cumulative segment lengths used to scalarize Modelica slice sums [m]
variable cumulativeLengths::Length[n_plus_1]
# Cumulative height differences used to scalarize Modelica slice sums [m]
variable cumulativeDheights::Length[n_plus_1]
# Cumulative cross-sectional areas used to scalarize Modelica slice sums [m2]
variable cumulativeCrossAreas::Area[n_plus_1]
# Cumulative hydraulic diameters used to scalarize Modelica slice sums [m]
variable cumulativeDimensions::Length[n_plus_1]
# Cumulative surface roughnesses used to scalarize Modelica slice sums [m]
variable cumulativeRoughnesses::Length[n_plus_1]
# Cumulative velocity-length products used for lumped mean velocities [m2/s]
variable cumulativeVelocityLengths::Real(units = "m2/s")[n_plus_1]
relations
for i in 1:n
guess mediums[i].p = ps_start[i]
guess mediums[i].h = h_start
guess mediums[i].T = T_start
ms[i] = fluidVolumes[i] * mediums[i].d
Us[i] = ms[i] * mediums[i].u
if nXi > 0
for j in 1:nXi
guess mediums[i].Xi[j] = X_start[j]
mXis[i, j] = ms[i] * mediums[i].Xi[j]
end
end
if nC > 0
for j in 1:nC
mCs[i, j] = ms[i] * Cs[i, j]
end
end
end
if case(energyDynamics, FluidComponents.Types.Dynamics.SteadyState)
for i in 1:n
0 = Hb_flows[i] + Wb_flows[i] + Qb_flows[i]
end
else
for i in 1:n
der(Us[i]) = Hb_flows[i] + Wb_flows[i] + Qb_flows[i]
end
end
if case(massDynamics, FluidComponents.Types.Dynamics.SteadyState)
for i in 1:n
0 = mb_flows[i]
end
else
for i in 1:n
der(ms[i]) = mb_flows[i]
end
end
if nXi > 0
if case(substanceDynamics, FluidComponents.Types.Dynamics.SteadyState)
for i in 1:n
for j in 1:nXi
0 = mbXi_flows[i, j]
end
end
else
for i in 1:n
for j in 1:nXi
der(mXis[i, j]) = mbXi_flows[i, j]
end
end
end
end
if nC > 0
if case(traceDynamics, FluidComponents.Types.Dynamics.SteadyState)
for i in 1:n
for j in 1:nC
0 = mbC_flows[i, j]
end
end
else
for i in 1:n
for j in 1:nC
der(mCs_scaled[i, j]) = mbC_flows[i, j] / MediaComponents.Interfaces.medium_C_nominal_at(medium_data, j)
mCs[i, j] = mCs_scaled[i, j] * MediaComponents.Interfaces.medium_C_nominal_at(medium_data, j)
end
end
end
end
if case(energyDynamics, FluidComponents.Types.Dynamics.FixedInitial)
if case(ThermoStates, MediaComponents.Interfaces.Choices.IndependentVariables.ph) or case(ThermoStates, MediaComponents.Interfaces.Choices.IndependentVariables.phX)
for i in 1:n
initial mediums[i].h = h_start
end
else
for i in 1:n
initial mediums[i].T = T_start
end
end
end
if case(energyDynamics, FluidComponents.Types.Dynamics.SteadyStateInitial)
if case(ThermoStates, MediaComponents.Interfaces.Choices.IndependentVariables.ph) or case(ThermoStates, MediaComponents.Interfaces.Choices.IndependentVariables.phX)
for i in 1:n
initial der(mediums[i].h) = 0
end
else
for i in 1:n
initial der(mediums[i].T) = 0
end
end
end
if initialize_p
if case(massDynamics, FluidComponents.Types.Dynamics.FixedInitial)
for i in 1:n
initial mediums[i].p = ps_start[i]
end
end
if case(massDynamics, FluidComponents.Types.Dynamics.SteadyStateInitial)
for i in 1:n
initial der(mediums[i].p) = 0
end
end
end
if nXi > 0
if case(substanceDynamics, FluidComponents.Types.Dynamics.FixedInitial)
for i in 1:n
for j in 1:nXi
initial mediums[i].Xi[j] = X_start[j]
end
end
end
if case(substanceDynamics, FluidComponents.Types.Dynamics.SteadyStateInitial)
for i in 1:n
for j in 1:nXi
initial der(mediums[i].Xi[j]) = 0
end
end
end
end
if nC > 0
if case(traceDynamics, FluidComponents.Types.Dynamics.FixedInitial)
for i in 1:n
for j in 1:nC
initial Cs[i, j] = C_start[j]
end
end
end
if case(traceDynamics, FluidComponents.Types.Dynamics.SteadyStateInitial)
for i in 1:n
for j in 1:nC
initial der(mCs[i, j]) = 0
end
end
end
end
for i in 1:nFM_plus_1
flowModel.states[i].p = statesFM[i].p
flowModel.states[i].T = statesFM[i].T
flowModel.states[i].d = statesFM[i].d
flowModel.states[i].h = statesFM[i].h
for j in 1:nX
flowModel.states[i].X[j] = statesFM[i].X[j]
end
flowModel.vs[i] = vsFM[i]
flowModel.crossAreas[i] = crossAreasFM[i]
flowModel.dimensions[i] = dimensionsFM[i]
flowModel.roughnesses[i] = roughnessesFM[i]
end
for i in 1:nFM
flowModel.pathLengths[i] = pathLengths[i]
flowModel.dheights[i] = dheightsFM[i]
end
cumulativeLengths[1] = 0
cumulativeDheights[1] = 0
cumulativeCrossAreas[1] = 0
cumulativeDimensions[1] = 0
cumulativeRoughnesses[1] = 0
cumulativeVelocityLengths[1] = 0
for i in 1:n
cumulativeLengths[i + 1] = cumulativeLengths[i] + lengths[i]
cumulativeDheights[i + 1] = cumulativeDheights[i] + dheights[i]
cumulativeCrossAreas[i + 1] = cumulativeCrossAreas[i] + crossAreas[i]
cumulativeDimensions[i + 1] = cumulativeDimensions[i] + dimensions[i]
cumulativeRoughnesses[i + 1] = cumulativeRoughnesses[i] + roughnesses[i]
cumulativeVelocityLengths[i + 1] = cumulativeVelocityLengths[i] + vs[i] * lengths[i]
end
if useLumpedPressure
if !case(modelStructure, FluidComponents.Types.ModelStructure.a_v_b)
pathLengths[1] = cumulativeLengths[n_plus_1]
dheightsFM[1] = cumulativeDheights[n_plus_1]
if n == 1
crossAreasFM[1] = crossAreas[1]
crossAreasFM[2] = crossAreas[1]
dimensionsFM[1] = dimensions[1]
dimensionsFM[2] = dimensions[1]
roughnessesFM[1] = roughnesses[1]
roughnessesFM[2] = roughnesses[1]
else
crossAreasFM[1] = cumulativeCrossAreas[iLumped] / (iLumped - 1)
crossAreasFM[2] = (cumulativeCrossAreas[n_plus_1] - cumulativeCrossAreas[iLumped]) / (n - iLumped + 1)
dimensionsFM[1] = cumulativeDimensions[iLumped] / (iLumped - 1)
dimensionsFM[2] = (cumulativeDimensions[n_plus_1] - cumulativeDimensions[iLumped]) / (n - iLumped + 1)
roughnessesFM[1] = cumulativeRoughnesses[iLumped] / (iLumped - 1)
roughnessesFM[2] = (cumulativeRoughnesses[n_plus_1] - cumulativeRoughnesses[iLumped]) / (n - iLumped + 1)
end
else
if n == 1
pathLengths[1] = lengths[1] / 2
pathLengths[2] = lengths[1] / 2
dheightsFM[1] = dheights[1] / 2
dheightsFM[2] = dheights[1] / 2
for i in 1:3
crossAreasFM[i] = crossAreas[1]
dimensionsFM[i] = dimensions[1]
roughnessesFM[i] = roughnesses[1]
end
else
pathLengths[1] = cumulativeLengths[iLumped]
pathLengths[2] = cumulativeLengths[n_plus_1] - cumulativeLengths[iLumped]
dheightsFM[1] = cumulativeDheights[iLumped]
dheightsFM[2] = cumulativeDheights[n_plus_1] - cumulativeDheights[iLumped]
crossAreasFM[1] = cumulativeCrossAreas[iLumped] / (iLumped - 1)
crossAreasFM[2] = cumulativeCrossAreas[n_plus_1] / n
crossAreasFM[3] = (cumulativeCrossAreas[n_plus_1] - cumulativeCrossAreas[iLumped]) / (n - iLumped + 1)
dimensionsFM[1] = cumulativeDimensions[iLumped] / (iLumped - 1)
dimensionsFM[2] = cumulativeDimensions[n_plus_1] / n
dimensionsFM[3] = (cumulativeDimensions[n_plus_1] - cumulativeDimensions[iLumped]) / (n - iLumped + 1)
roughnessesFM[1] = cumulativeRoughnesses[iLumped] / (iLumped - 1)
roughnessesFM[2] = cumulativeRoughnesses[n_plus_1] / n
roughnessesFM[3] = (cumulativeRoughnesses[n_plus_1] - cumulativeRoughnesses[iLumped]) / (n - iLumped + 1)
end
end
else
if case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
if n == 2
pathLengths[1] = lengths[1] + lengths[2]
dheightsFM[1] = dheights[1] + dheights[2]
else
pathLengths[1] = lengths[1] + 0.5 * lengths[2]
dheightsFM[1] = dheights[1] + 0.5 * dheights[2]
for i in 2:n - 2
pathLengths[i] = 0.5 * (lengths[i] + lengths[i + 1])
dheightsFM[i] = 0.5 * (dheights[i] + dheights[i + 1])
end
pathLengths[n - 1] = 0.5 * lengths[n - 1] + lengths[n]
dheightsFM[n - 1] = 0.5 * dheights[n - 1] + dheights[n]
end
for i in 1:n
crossAreasFM[i] = crossAreas[i]
dimensionsFM[i] = dimensions[i]
roughnessesFM[i] = roughnesses[i]
end
elseif case(modelStructure, FluidComponents.Types.ModelStructure.av_b)
for i in 1:n
pathLengths[i] = lengths[i]
dheightsFM[i] = dheights[i]
crossAreasFM[i] = crossAreas[i]
dimensionsFM[i] = dimensions[i]
roughnessesFM[i] = roughnesses[i]
end
crossAreasFM[n_plus_1] = crossAreas[n]
dimensionsFM[n_plus_1] = dimensions[n]
roughnessesFM[n_plus_1] = roughnesses[n]
elseif case(modelStructure, FluidComponents.Types.ModelStructure.a_vb)
crossAreasFM[1] = crossAreas[1]
dimensionsFM[1] = dimensions[1]
roughnessesFM[1] = roughnesses[1]
for i in 1:n
pathLengths[i] = lengths[i]
dheightsFM[i] = dheights[i]
crossAreasFM[i + 1] = crossAreas[i]
dimensionsFM[i + 1] = dimensions[i]
roughnessesFM[i + 1] = roughnesses[i]
end
else
pathLengths[1] = 0.5 * lengths[1]
dheightsFM[1] = 0.5 * dheights[1]
crossAreasFM[1] = crossAreas[1]
dimensionsFM[1] = dimensions[1]
roughnessesFM[1] = roughnesses[1]
for i in 2:n
pathLengths[i] = 0.5 * (lengths[i - 1] + lengths[i])
dheightsFM[i] = 0.5 * (dheights[i - 1] + dheights[i])
crossAreasFM[i] = crossAreas[i - 1]
dimensionsFM[i] = dimensions[i - 1]
roughnessesFM[i] = roughnesses[i - 1]
end
pathLengths[n_plus_1] = 0.5 * lengths[n]
dheightsFM[n_plus_1] = 0.5 * dheights[n]
crossAreasFM[n_plus_1] = crossAreas[n]
dimensionsFM[n_plus_1] = dimensions[n]
roughnessesFM[n_plus_1] = roughnesses[n]
crossAreasFM[n_plus_1 + 1] = crossAreas[n]
dimensionsFM[n_plus_1 + 1] = dimensions[n]
roughnessesFM[n_plus_1 + 1] = roughnesses[n]
end
end
guess m_flows = fill(m_flow_start, n_plus_1)
state_a.p = port_a.p
state_b.p = port_b.p
if useInnerPortProperties
state_a.h = mediums[1].h
state_b.h = mediums[n].h
for j in 1:nX
state_a.X[j] = mediums[1].X[j]
state_b.X[j] = mediums[n].X[j]
end
else
state_a.h = instream(port_a.h_outflow)
state_b.h = instream(port_b.h_outflow)
if fixedX
for j in 1:nX
state_a.X[j] = mediums[1].X[j]
state_b.X[j] = mediums[n].X[j]
end
elseif reducedX
if nXi > 0
for j in 1:nXi
state_a.X[j] = instream(port_a.Xi_outflow[j])
state_b.X[j] = instream(port_b.Xi_outflow[j])
end
state_a.X[nX] = 1 - sum(instream(port_a.Xi_outflow))
state_b.X[nX] = 1 - sum(instream(port_b.Xi_outflow))
else
state_a.X[nX] = 1
state_b.X[nX] = 1
end
else
for j in 1:nX
state_a.X[j] = instream(port_a.Xi_outflow[j])
state_b.X[j] = instream(port_b.Xi_outflow[j])
end
end
end
state_a.T = MediaComponents.Interfaces.temperature_phX(medium_data, state_a.p, state_a.h, state_a.X)
state_a.d = MediaComponents.Interfaces.density_phX(medium_data, state_a.p, state_a.h, state_a.X)
state_b.T = MediaComponents.Interfaces.temperature_phX(medium_data, state_b.p, state_b.h, state_b.X)
state_b.d = MediaComponents.Interfaces.density_phX(medium_data, state_b.p, state_b.h, state_b.X)
for i in 1:n
fluidVolumes[i] = crossAreas[i] * lengths[i] * nParallel
vs[i] = 0.5 * (m_flows[i] + m_flows[i + 1]) / mediums[i].d / crossAreas[i] / nParallel
mb_flows[i] = m_flows[i] - m_flows[i + 1]
Hb_flows[i] = H_flows[i] - H_flows[i + 1]
if nXi > 0
for j in 1:nXi
mbXi_flows[i, j] = mXi_flows[i, j] - mXi_flows[i + 1, j]
end
end
if nC > 0
for j in 1:nC
mbC_flows[i, j] = mC_flows[i, j] - mC_flows[i + 1, j]
end
end
end
for i in 2:n
H_flows[i] = FluidComponents.semilinear(m_flows[i], mediums[i - 1].h, mediums[i].h)
if nXi > 0
for j in 1:nXi
mXi_flows[i, j] = FluidComponents.semilinear(m_flows[i], mediums[i - 1].Xi[j], mediums[i].Xi[j])
end
end
if nC > 0
for j in 1:nC
mC_flows[i, j] = FluidComponents.semilinear(m_flows[i], Cs[i - 1, j], Cs[i, j])
end
end
end
H_flows[1] = FluidComponents.semilinear(port_a.m_flow, instream(port_a.h_outflow), mediums[1].h)
H_flows[n_plus_1] = -FluidComponents.semilinear(port_b.m_flow, instream(port_b.h_outflow), mediums[n].h)
if nXi > 0
for j in 1:nXi
mXi_flows[1, j] = FluidComponents.semilinear(port_a.m_flow, instream(port_a.Xi_outflow[j]), mediums[1].Xi[j])
mXi_flows[n_plus_1, j] = -FluidComponents.semilinear(port_b.m_flow, instream(port_b.Xi_outflow[j]), mediums[n].Xi[j])
end
end
if nC > 0
for j in 1:nC
mC_flows[1, j] = FluidComponents.semilinear(port_a.m_flow, instream(port_a.C_outflow[j]), Cs[1, j])
mC_flows[n_plus_1, j] = -FluidComponents.semilinear(port_b.m_flow, instream(port_b.C_outflow[j]), Cs[n, j])
end
end
port_a.m_flow = m_flows[1]
port_b.m_flow = -m_flows[n_plus_1]
port_a.h_outflow = mediums[1].h
port_b.h_outflow = mediums[n].h
if nXi > 0
for j in 1:nXi
port_a.Xi_outflow[j] = mediums[1].Xi[j]
port_b.Xi_outflow[j] = mediums[n].Xi[j]
end
else
port_a.Xi_outflow[1] = 0
port_b.Xi_outflow[1] = 0
end
# Trace properties are stored in the volumes and therefore use the same
# adjacent-volume outflow convention as the independent mass fractions.
if nC > 0
for j in 1:nC
port_a.C_outflow[j] = Cs[1, j]
port_b.C_outflow[j] = Cs[n, j]
end
else
port_a.C_outflow[1] = 0
port_b.C_outflow[1] = 0
end
if useLumpedPressure
if !case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
for i in 2:n
mediums[i].p = mediums[1].p
end
elseif n > 2
for i in 2:iLumped - 1
mediums[i].p = mediums[1].p
end
for i in iLumped:n - 1
mediums[i].p = mediums[n].p
end
end
if case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
port_a.p = mediums[1].p
port_b.p = mediums[n].p
statesFM[1].p = mediums[1].p
statesFM[1].T = mediums[1].T
statesFM[1].d = mediums[1].d
statesFM[1].h = mediums[1].h
statesFM[2].p = mediums[n].p
statesFM[2].T = mediums[n].T
statesFM[2].d = mediums[n].d
statesFM[2].h = mediums[n].h
for j in 1:nX
statesFM[1].X[j] = mediums[1].X[j]
statesFM[2].X[j] = mediums[n].X[j]
end
m_flows[iLumped] = flowModel.m_flows[1]
vsFM[1] = cumulativeVelocityLengths[iLumped] / cumulativeLengths[iLumped]
vsFM[2] = (cumulativeVelocityLengths[n_plus_1] - cumulativeVelocityLengths[iLumped]) / (cumulativeLengths[n_plus_1] - cumulativeLengths[iLumped])
elseif case(modelStructure, FluidComponents.Types.ModelStructure.av_b)
port_a.p = mediums[1].p
statesFM[1].p = mediums[iLumped].p
statesFM[1].T = mediums[iLumped].T
statesFM[1].d = mediums[iLumped].d
statesFM[1].h = mediums[iLumped].h
statesFM[2].p = state_b.p
statesFM[2].T = state_b.T
statesFM[2].d = state_b.d
statesFM[2].h = state_b.h
for j in 1:nX
statesFM[1].X[j] = mediums[iLumped].X[j]
statesFM[2].X[j] = state_b.X[j]
end
m_flows[n_plus_1] = flowModel.m_flows[1]
vsFM[1] = cumulativeVelocityLengths[n_plus_1] / cumulativeLengths[n_plus_1]
vsFM[2] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
elseif case(modelStructure, FluidComponents.Types.ModelStructure.a_vb)
port_b.p = mediums[n].p
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
statesFM[2].p = mediums[iLumped].p
statesFM[2].T = mediums[iLumped].T
statesFM[2].d = mediums[iLumped].d
statesFM[2].h = mediums[iLumped].h
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
statesFM[2].X[j] = mediums[iLumped].X[j]
end
m_flows[1] = flowModel.m_flows[1]
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
vsFM[2] = cumulativeVelocityLengths[n_plus_1] / cumulativeLengths[n_plus_1]
else
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
statesFM[2].p = mediums[iLumped].p
statesFM[2].T = mediums[iLumped].T
statesFM[2].d = mediums[iLumped].d
statesFM[2].h = mediums[iLumped].h
statesFM[3].p = state_b.p
statesFM[3].T = state_b.T
statesFM[3].d = state_b.d
statesFM[3].h = state_b.h
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
statesFM[2].X[j] = mediums[iLumped].X[j]
statesFM[3].X[j] = state_b.X[j]
end
m_flows[1] = flowModel.m_flows[1]
m_flows[n_plus_1] = flowModel.m_flows[2]
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
vsFM[2] = cumulativeVelocityLengths[n_plus_1] / cumulativeLengths[n_plus_1]
vsFM[3] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
end
else
if case(modelStructure, FluidComponents.Types.ModelStructure.av_vb)
for i in 1:n
statesFM[i].p = mediums[i].p
statesFM[i].T = mediums[i].T
statesFM[i].d = mediums[i].d
statesFM[i].h = mediums[i].h
vsFM[i] = vs[i]
for j in 1:nX
statesFM[i].X[j] = mediums[i].X[j]
end
end
for i in 1:n - 1
m_flows[i + 1] = flowModel.m_flows[i]
end
port_a.p = mediums[1].p
port_b.p = mediums[n].p
elseif case(modelStructure, FluidComponents.Types.ModelStructure.av_b)
for i in 1:n
statesFM[i].p = mediums[i].p
statesFM[i].T = mediums[i].T
statesFM[i].d = mediums[i].d
statesFM[i].h = mediums[i].h
vsFM[i] = vs[i]
for j in 1:nX
statesFM[i].X[j] = mediums[i].X[j]
end
end
statesFM[n_plus_1].p = state_b.p
statesFM[n_plus_1].T = state_b.T
statesFM[n_plus_1].d = state_b.d
statesFM[n_plus_1].h = state_b.h
for j in 1:nX
statesFM[n_plus_1].X[j] = state_b.X[j]
end
for i in 1:n
m_flows[i + 1] = flowModel.m_flows[i]
end
vsFM[n_plus_1] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
port_a.p = mediums[1].p
elseif case(modelStructure, FluidComponents.Types.ModelStructure.a_vb)
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
end
for i in 1:n
statesFM[i + 1].p = mediums[i].p
statesFM[i + 1].T = mediums[i].T
statesFM[i + 1].d = mediums[i].d
statesFM[i + 1].h = mediums[i].h
m_flows[i] = flowModel.m_flows[i]
vsFM[i + 1] = vs[i]
for j in 1:nX
statesFM[i + 1].X[j] = mediums[i].X[j]
end
end
port_b.p = mediums[n].p
else
statesFM[1].p = state_a.p
statesFM[1].T = state_a.T
statesFM[1].d = state_a.d
statesFM[1].h = state_a.h
vsFM[1] = m_flows[1] / state_a.d / crossAreas[1] / nParallel
for j in 1:nX
statesFM[1].X[j] = state_a.X[j]
end
for i in 1:n
statesFM[i + 1].p = mediums[i].p
statesFM[i + 1].T = mediums[i].T
statesFM[i + 1].d = mediums[i].d
statesFM[i + 1].h = mediums[i].h
m_flows[i] = flowModel.m_flows[i]
vsFM[i + 1] = vs[i]
for j in 1:nX
statesFM[i + 1].X[j] = mediums[i].X[j]
end
end
m_flows[n_plus_1] = flowModel.m_flows[n_plus_1]
statesFM[n_plus_1 + 1].p = state_b.p
statesFM[n_plus_1 + 1].T = state_b.T
statesFM[n_plus_1 + 1].d = state_b.d
statesFM[n_plus_1 + 1].h = state_b.h
vsFM[n_plus_1 + 1] = m_flows[n_plus_1] / state_b.d / crossAreas[n] / nParallel
for j in 1:nX
statesFM[n_plus_1 + 1].X[j] = state_b.X[j]
end
end
end
metadata {}
endTest Cases ​
No test cases defined.
Related ​
Examples
Experiments
Analyses