Sources.Boundary_pT ​
Fluid boundary with prescribed pressure, temperature, composition, and trace substances.
The boundary pressure always constrains the connected network. Temperature, composition, and trace substances determine the outflow state when fluid enters the network from the boundary.
This component extends from FluidComponents.Sources.BaseClasses.PartialSource
Usage ​
FluidComponents.Sources.Boundary_pT(p, T, X=MediaComponents.Interfaces.medium_X_default(medium_data), C=MediaComponents.Interfaces.medium_C_default(medium_data))
Parameters: ​
| Name | Description | Units | Default value |
|---|---|---|---|
medium_data | – | ||
nPorts | – | ||
nX | – | FluidCompon...edium_data) | |
nXi | – | FluidCompon...edium_data) | |
nC | – | FluidCompon...edium_data) | |
use_p_in | – | false | |
p | Pa | ||
T | K | ||
X | kg/kg | MediaCompon...edium_data) | |
C | – | MediaCompon...edium_data) |
Connectors ​
ports- Generic fluid connector at the design outlet. (FluidPort_b)p_in- This connector represents a real signal as an input to a component (RealInput)
Behavior ​
This component has required parameters without default values, so it is not constructed here; see the Parameters table.
Source ​
"""
Fluid boundary with prescribed pressure, temperature, composition, and trace
substances.
The boundary pressure always constrains the connected network. Temperature,
composition, and trace substances determine the outflow state when fluid
enters the network from the boundary.
"""
component Boundary_pT
extends FluidComponents.Sources.BaseClasses.PartialSource()
# Whether the boundary pressure is supplied through a signal input [-]
structural parameter use_p_in::Boolean = false
# Boundary pressure [Pa]
parameter p::MediaComponents.Types.AbsolutePressure
# Boundary temperature [K]
parameter T::MediaComponents.Types.Temperature
# Boundary mass fractions [kg/kg]
parameter X::MediaComponents.Types.MassFraction[nX] = MediaComponents.Interfaces.medium_X_default(medium_data)
# Boundary trace substances [-]
parameter C::MediaComponents.Types.ExtraProperty[nC] = MediaComponents.Interfaces.medium_C_default(medium_data) if nC > 0
"Prescribed boundary-pressure signal."
p_in = RealInput(units = "Pa") if use_p_in {
"Dyad": {
"placement": {
"diagram": {"iconName": "default", "x1": -100, "y1": 0, "x2": 100, "y2": 200, "rot": 0},
"icon": {"iconName": "default", "x1": -100, "y1": 0, "x2": 100, "y2": 200, "rot": 0}
}
}
}
relations
if use_p_in
medium.p = p_in
else
medium.p = p
end
medium.T = T
if nXi > 0
for j in 1:nXi
medium.Xi[j] = X[j]
end
end
if nC > 0
for i in 1:nPorts
for j in 1:nC
ports[i].C_outflow[j] = C[j]
end
end
end
metadata {
"Dyad": {
"labels": [{"label": "$(instance)", "x": 500, "y": 950, "rot": 0, "layer": "icon"}],
"icons": {"default": "dyad://FluidComponents/icons/Boundary_pT.svg"}
}
}
endFlattened Source
"""
Fluid boundary with prescribed pressure, temperature, composition, and trace
substances.
The boundary pressure always constrains the connected network. Temperature,
composition, and trace substances determine the outflow state when fluid
enters the network from the boundary.
"""
component Boundary_pT
# Immutable medium definition selected at model construction [-]
structural parameter medium_data::MediaComponents.Interfaces.AbstractPartialMediumData
# Number of fluid ports [-]
structural parameter nPorts::Integer(min = 0)
# Number of mass fractions [-]
final structural parameter nX::Integer = MediaComponents.Interfaces.medium_nX(medium_data)
# Number of independent mass fractions [-]
final structural parameter nXi::Integer = MediaComponents.Interfaces.medium_nXi(medium_data)
# Number of extra transported properties [-]
final structural parameter nC::Integer = MediaComponents.Interfaces.medium_nC(medium_data)
"Thermodynamic properties inside the boundary."
medium = MediaComponents.Interfaces.BaseProperties(medium_data = medium_data)
"Fluid ports connected to the boundary."
ports = [FluidComponents.Interfaces.FluidPort_b(medium_data = medium_data) for i in 1:nPorts] {
"Dyad": {
"placement": {
"diagram": {"iconName": "default", "x1": 950, "y1": 300, "x2": 1050, "y2": 700, "rot": 0},
"icon": {"iconName": "default", "x1": 950, "y1": 300, "x2": 1050, "y2": 700, "rot": 0}
}
}
}
# Whether the boundary pressure is supplied through a signal input [-]
structural parameter use_p_in::Boolean = false
# Boundary pressure [Pa]
parameter p::MediaComponents.Types.AbsolutePressure
# Boundary temperature [K]
parameter T::MediaComponents.Types.Temperature
# Boundary mass fractions [kg/kg]
parameter X::MediaComponents.Types.MassFraction[nX] = MediaComponents.Interfaces.medium_X_default(medium_data)
# Boundary trace substances [-]
parameter C::MediaComponents.Types.ExtraProperty[nC] = MediaComponents.Interfaces.medium_C_default(medium_data) if nC > 0
"Prescribed boundary-pressure signal."
p_in = RealInput(units = "Pa") if use_p_in {
"Dyad": {
"placement": {
"diagram": {"iconName": "default", "x1": -100, "y1": 0, "x2": 100, "y2": 200, "rot": 0},
"icon": {"iconName": "default", "x1": -100, "y1": 0, "x2": 100, "y2": 200, "rot": 0}
}
}
}
relations
for i in 1:nPorts
ports[i].p = medium.p
ports[i].h_outflow = medium.h
if nXi > 0
for j in 1:nXi
ports[i].Xi_outflow[j] = medium.Xi[j]
end
else
ports[i].Xi_outflow[1] = 0
end
if nC == 0
ports[i].C_outflow[1] = 0
end
end
if use_p_in
medium.p = p_in
else
medium.p = p
end
medium.T = T
if nXi > 0
for j in 1:nXi
medium.Xi[j] = X[j]
end
end
if nC > 0
for i in 1:nPorts
for j in 1:nC
ports[i].C_outflow[j] = C[j]
end
end
end
metadata {
"Dyad": {
"labels": [{"label": "$(instance)", "x": 500, "y": 950, "rot": 0, "layer": "icon"}],
"icons": {"default": "dyad://FluidComponents/icons/Boundary_pT.svg"}
}
}
endTest Cases ​
No test cases defined.
Related ​
Examples
Experiments
Analyses