Skip to content

Driveline SciML Demo ​

Download this exampleDrivelineSciML.zipFull project — Dyad model + Julia + data

An electric car has a rubbery coupling between its motor and its wheels that soaks up shock. Nobody has measured how it behaves, so this demo shakes it in controlled ways and fits a model to what comes back.

That coupling is a nonlinear torsional isolator: a twisting spring and damper whose stiffness depends on how fast and how far it is twisted. Its torque comes from three paths at once:

  • a baseline path — how it responds to slow, steady twisting;

  • a Maxwell relaxation element — extra stiffness that shows up only at high frequencies;

  • a Bouc-Wen hysteresis element — torque that depends on where the twist has been, not just where it is now.

The demo recovers the hidden parameters in two stages. Stage 1 shakes the coupling gently across a sweep of frequencies; Stage 2 cycles it slowly at full amplitude. Both stages fit with SciML optimization.

Note

This is a heavy SciML demo. The model diagram below renders from a snapshot; run the calibration itself from the DrivelineSciML project.

The model ​

DrivelineSystem is the assembled driveline: the torque source, engine inertia, Maxwell-Bouc-Wen isolator, load inertia, load damper, and ground: