Dyad

Appearance

LIBRARY
TwoInertiasWithDrivingTorque.md

TwoInertiasWithDrivingTorque ​

Usage ​

TwoInertiasWithDrivingTorque()

Behavior ​

Source ​

dyad
test component TwoInertiasWithDrivingTorque
  fixed = Fixed()
  torque = TorqueSource()
  inertia1 = Inertia(J=2)
  inertia2 = Inertia(J=4)
  spring = Spring(c=1e4)
  damper = Damper(d=10)
  sine = BlockComponents.Sine(amplitude=10, frequency=5)
relations
  initial inertia1.phi = 1
  initial inertia2.phi = 0.5
  initial inertia2.a = 0
  connect(sine.y, torque.tau)
  connect(torque.support, fixed.spline)
  connect(torque.spline, inertia1.spline_a)
  connect(inertia1.spline_b, spring.spline_a, damper.spline_a)
  connect(spring.spline_b, damper.spline_b, inertia2.spline_a)
metadata {
  "JuliaSim": {
    "tests": {
      "case1": {
        "stop": 1,
        "expect": {
          "initial": {"inertia1.phi": 1, "inertia2.phi": 0.5, "inertia1.w": -500, "inertia2.w ": 0}
        }
      }
    }
  }
}
end
Flattened Source
test component TwoInertiasWithDrivingTorque
  fixed = Fixed()
  torque = TorqueSource()
  inertia1 = Inertia(J=2)
  inertia2 = Inertia(J=4)
  spring = Spring(c=1e4)
  damper = Damper(d=10)
  sine = BlockComponents.Sine(amplitude=10, frequency=5)
relations
  initial inertia1.phi = 1
  initial inertia2.phi = 0.5
  initial inertia2.a = 0
  connect(sine.y, torque.tau)
  connect(torque.support, fixed.spline)
  connect(torque.spline, inertia1.spline_a)
  connect(inertia1.spline_b, spring.spline_a, damper.spline_a)
  connect(spring.spline_b, damper.spline_b, inertia2.spline_a)
metadata {
  "JuliaSim": {
    "tests": {
      "case1": {
        "stop": 1,
        "expect": {
          "initial": {"inertia1.phi": 1, "inertia2.phi": 0.5, "inertia1.w": -500, "inertia2.w ": 0}
        }
      }
    }
  }
}
end

Test Cases ​

Test Case case1 ​